| Home | Changes | Download | FAQ | Benchmark | Fedora | RHEL4 | Survey | Survey results | Impressum |
| Manufacturer | Promise |
|---|---|
| Model | SuperTrak SX6000 |
| Driver | 1,288 patch for 2.6.11 |
| Kernel | 2.6.11-hardened-r15 |
| Architecture | 32-bit |
| System | S2462/Tyan Thunder K7 (dual Athlon). CPU's: AMD Athlon(tm) MP 1800+ stepping 2 512MB/3GB Memory 4x 250GB Maxtor Daimondplus 10 in RAID5 Bridge: AMD-766 [ViperPlus] ACPI (rev 01) Host Bridge: AMD-760 MP [IGD4-2P] System Controller (rev 11) 3x PDC20277 on SX6000 card. |
| Working | no |
| Comment | Actually works: a little bit. With BIOS Build 77: modules load, RAID accessible, but system crashes after writing various amounts of data. (500MB~4GB) (the ussual). With BIOS 1.20.0.1: Kernel OOPS when loading modules. With BIOS 1.20.0.4: Kernel OOPS when loading modules. With all BIOSes : When loading i2o_proc, Kernel OOPS and SX6000 starts beeping. Tried the patch of Andreas Dahlgren but same problem. Any suggestions for another RAID board? |
| Reporter | Bjorn Padding |
THE SOFTWARE AND INFORMATION ON THIS SITE IS PROVIDED BY SHADOW CONNECT "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SHADOW CONNECT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE OR INFORMATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Sponsored by