| Home | Changes | Download | FAQ | Benchmark | Fedora | RHEL4 | Survey | Survey results | Impressum |
| Manufacturer | Promise |
|---|---|
| Model | SuperTrak SX6000 |
| Driver | i2o |
| Kernel | 2.6.17.x |
| Architecture | 32-bit |
| System | MSI 865PE Neo2 FISR2 P4 2400; 1.0GB RAM; CRUX-Linux 2.2; Kernel 2.6.17.3; Raid5: 5x160GB ST3160021A; Controller firmware 1.20.0.27. |
| Working | yes |
| Comment | Used i2o included in the 2.6.17.3 kernel. "Other" must be selected in SX6000 BIOS. Then I could access the existing array by mounting /dev/i2o/hda1. Works fine so far but haven't done any tests with a heavy loaded system. |
| Reporter | Theo Kanter |
THE SOFTWARE AND INFORMATION ON THIS SITE IS PROVIDED BY SHADOW CONNECT "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SHADOW CONNECT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE OR INFORMATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Sponsored by