| Home | Changes | Download | FAQ | Benchmark | Fedora | RHEL4 | Survey | Survey results | Impressum |
| Manufacturer | Adaptec |
|---|---|
| Model | ASR-2100S |
| Driver | |
| Kernel | 2.6.8-24.13-smp |
| Architecture | 32-bit |
| System | SuSE Professional 9.2 SuSE kernel 2.6.8-24.13-smp ASR 2100S with last firmware, Bios, SMOR, NVRAM ( I2OBIOS.162, SMOR0079.112, CHNLV1_1.NVR ) Motherboard : Intel D865GBFL with Bios P23 Two Harddisks : IBM 36 GB IC35L036UWDY10-0 raidutil-0.0.6 |
| Working | yes |
| Comment | It's works ( test -> alarm on/off, create/delete raid1, rebuild ). I install OS manually and choose aacraid module > dmesg ... Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... ACPI: PCI interrupt 0000:01:03.1[A] -> GSI 19 (level, low) -> IRQ 193 Adaptec I2O RAID controller 0 at f8c80000 size=100000 irq=193 dpti: If you have a lot of devices this could take a few minutes. dpti0: Reading the hardware resource table. TID 008 Vendor: ADAPTEC Device: AIC-7899 Rev: 00000001 TID 517 Vendor: ADAPTEC Device: RAID-1 Rev: 320R scsi0 : Vendor: Adaptec Model: 2100S FW:320R Vendor: ADAPTEC Model: RAID-1 Rev: 320R Type: Direct-Access ANSI SCSI revision: 02 ... |
| Reporter | Thierry Bagnoud |
THE SOFTWARE AND INFORMATION ON THIS SITE IS PROVIDED BY SHADOW CONNECT "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SHADOW CONNECT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE OR INFORMATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Sponsored by